Aluma Tray
HD-60
A chassis cab flatbed for 60 inch cab to axle trucks, rated to 5,000 lbs with the full width bulkhead already included.
Chassis cabs come without a bed, so the tray is the bed. The Aluma Tray HD-60 is sized for domestic commercial chassis cabs with a 60 inch cab to axle measurement, from the 1 ton up, and gives you a vacant deck 9’02” long by 7’ wide.
It’s rated to 5,000 lbs spread across the deck, and the bulkhead isn’t an add-on here. A 7” tapered bulkhead runs the full 84” width, with a dual locking sealed compartment up top. Below it, the passenger side stores the folding stairs behind a sealed door and the driver side holds the fuel and DEF fills.
The rest is classic Aluma Tray: CNC cut and formed high strength aluminum, matte black powder coat, a Rhino Lined deck and four locking under-deck boxes. Camper securement brackets sit on the sides, front and back, the anchor points work with TorkLift Derringer hardware, and the tray mounts to dealer drilled chassis locations on 5” SIL rails.
- Fits
- 1 ton chassis cab, 60 inch cab to axle
- Rated Load
- 5,000 lbs (2,273 kg), evenly distributed
- Tray Weight
- ≥ 840 lbs
- Vacant Deck
- 9’02” long x 7’ wide
- Deck Surface
- Rhino Lined
- Construction
- CNC cut and formed high strength aluminum, powder coated
- Storage
- Four locking under-deck boxes
- Bulkhead
- 7” tapered, full width 84”, included
- Lead Time
- About 8 weeks
- Starting Price
- $17,820 USD
Standard Equipment
Turn It Around
Pulled straight from the build files. Let it turn on its own, or drag it to look at the part you care about.
What a Build Costs
The starting price covers the tray and its standard equipment. Every build adds a mounting kit and a fuel kit, and what you pay for those depends on your truck. Options are priced one at a time below. All prices are USD MSRP, for buyers in the US and Canada.
Required on Every Build
- Tray to chassis mounting kitBrackets, hardware and fasteners. The exact kit depends on your truck.
- $1,166
- Fuel kit, gasSingle mount plate with a gas fill bucket, hoses and fasteners.
- $290
- Fuel kit, diesel without DEFSingle mount plate with a diesel fill bucket, hoses and fasteners.
- $290
- Fuel kit, diesel with DEFDouble mount plate with diesel and DEF fill buckets, hoses and fasteners.
- $542
- Dually fender extensionOnly for dual rear wheel trucks. Comes with fenders, a stair mount extender and extensions for the front jacks. Also a good fit for a single rear wheel truck converted to wider MPT tires.
- $2,268
Front Bulkhead
- 7” Solid, tapered, full width 84”Comes with the tray.
- Included
Folding Stairs
- Folding stairs, 4 step, 37” (standard height)Aluminum steps in black powder coat with anti-skid treads and adjustable feet. Side mounted, and they ride inside the bulkhead when you travel.
- $1,168
- Folding stairs, 4 step, 43”Same side mounted design for a taller step-up.
- $1,168
- Folding stairs, 5 step, 47”Adds a fifth step for the tallest setups.
- $1,285
Under the Tray
- 72” rear drawerSealed, 5” tall by 22.25” wide. Ford and GM trucks.
- $2,385
- 14 gallon auxiliary fresh water tankSits under the tray between the sill rails.
- $869
- 20 gallon gray water tankTakes the place of the driver side rear under-deck box.
- No charge
- Outdoor kitchenBuilt into the lower front storage box, with room for a grill or cooktop (not included).
- $1,246
- Rear sensor barMounts under the rear apron and carries over the sensors from your factory bumper. Fits Ford and Ram. GM trucks are still being tested, so check with your dealer before ordering one for a GM.
- $398
Front Cargo Boxes
- Tire rack, passenger sideMounts on the deck between the camper and the bulkhead. 14.5” wide.
- $1,034
- 25” rectangular box, driver side
- $2,491
- 25” rectangular box, passenger side
- $2,491
Deck
- 12” removable perimeter fenceBolts to the L-Track.
- $2,650
Other Options
- BLIS radar lens covers
- $195
- Dually jack bracket adaptersSet wide to clear dually fenders.
- Ask for pricing
- Custom powder coatingA powder coat color picked to come close to your truck’s paint. Non-metallic only, no wet paint, and you approve a color sample first. Expect a close match, not an exact one.
- $1,200
Dealer installation is extra and quoted by your dealer. Tariffs are normally built into the price unless your purchase agreement says otherwise. For an exact number, book a consultation and we’ll price your full build line by line.
See It in the Field
Pair It with a Camper
Aluma Tray HD-60 FAQ
What does 60 inch cab to axle mean?
It’s the measurement from the back of the cab to the center of the rear axle. Chassis cabs are ordered by this number, and it decides which tray fits. The HD-60 is built for 60 inches, so check your truck’s spec before ordering.
Will the HD-60 fit an F-450, F-550, Ram 4500 or Ram 5500?
Yes, as long as the chassis has a 60 inch cab to axle. The HD-60 fits domestic commercial chassis cabs at that measurement, from the 1 ton up.
Is the bulkhead included with the HD-60?
Yes. The 7” tapered bulkhead runs the full 84” width of the tray and is part of the $17,820 USD starting price.
Can a High Country ride on the HD-60?
Yes. A High Country can go on a standard Aluma Tray secured with TorkLift tie-downs. If you want the camper bolted straight to the tray, the HD-60-HC has deck pockets made for the High Country’s mounting feet.
What about an 84 inch cab to axle chassis?
That’s the HD-84, coming as a 2027 model. The first one is being built now. Price, weight and load rating will be published once the factory signs them off.
How much weight can an Aluma Tray carry?
The 6.75’ and 8’ carry 3,000 lbs and the HD-60 and HD-60-HC carry 5,000 lbs. Both ratings are for a load spread evenly across the deck, not stacked in one spot.
How long does an Aluma Tray take to build?
Plan on about 8 weeks. That number moves with how busy the shop is, so ask your dealer or book a consultation for the current build slots.
What warranty comes with an Aluma Tray?
Lite Industries backs every Aluma Tray with a one year limited base warranty and a three year limited structural warranty. Register within 30 days of purchase to activate it. Coverage is for personal use only.
Tell us your truck.
We'll spec the right tray.

