Aluma Tray
HD-60-HC
The chassis cab flatbed made for the OEV High Country. The camper bolts into pockets in the deck and the two travel as one unit.
The High Country has feet built into its underside, and the Aluma Tray HD-60-HC is designed around them. Four tapered pockets in the deck, two at the front and two at the rear, catch those feet. The camper bolts down into the pockets, stays isolated from the deck, and rides as one assembly with the tray.
It goes on domestic commercial chassis cabs with a 60 inch cab to axle measurement and carries the same 5,000 lb rating as the HD-60, on an 8’ long by 7’ wide vacant deck. The bulkhead is a deeper 15” rectangular unit on the driver side half, 42” wide, with a locking sealed compartment up top and the fuel and DEF fills below. The passenger side stays open for a matching 15” box or a 14.5” spare tire carrier.
A High Country can also run on a standard tray with TorkLift tie-downs. The HD-60-HC is for owners who want the camper bolted straight to the deck.
- Fits
- Domestic commercial 60 inch cab to axle chassis
- Rated Load
- 5,000 lbs (2,273 kg), evenly distributed
- Tray Weight
- ≥ 900 lbs
- Vacant Deck
- 8’ long x 7’ wide
- Deck Surface
- Rhino Lined
- Construction
- CNC cut and formed high strength aluminum, powder coated
- Storage
- Four locking under-deck boxes
- Bulkhead
- 15” rectangular, driver side half, 42” wide, included
- Lead Time
- About 8 weeks
- Starting Price
- $19,075 USD
Standard Equipment
What a Build Costs
The starting price covers the tray and its standard equipment. Every build adds a mounting kit and a fuel kit, and what you pay for those depends on your truck. Options are priced one at a time below. All prices are USD MSRP, for buyers in the US and Canada.
Required on Every Build
- Tray to chassis mounting kitBrackets, hardware and fasteners. The exact kit depends on your truck.
- $1,166
- Fuel kit, gasSingle mount plate with a gas fill bucket, hoses and fasteners.
- $290
- Fuel kit, diesel without DEFSingle mount plate with a diesel fill bucket, hoses and fasteners.
- $290
- Fuel kit, diesel with DEFDouble mount plate with diesel and DEF fill buckets, hoses and fasteners.
- $542
- Dually fender extensionOnly for dual rear wheel trucks. Comes with fenders, a stair mount extender and extensions for the front jacks. Also a good fit for a single rear wheel truck converted to wider MPT tires.
- $2,268
Front Bulkhead
- 15” Solid, driver sideComes with the tray. Fuel and DEF compartment below.
- Included
Folding Stairs
- Folding stairs, 4 step, 37” (standard height)Aluminum steps in black powder coat with anti-skid treads and adjustable feet. Side mounted, and they ride inside the bulkhead when you travel.
- $1,168
- Folding stairs, 4 step, 43”Same side mounted design for a taller step-up.
- $1,168
- Folding stairs, 5 step, 47”Adds a fifth step for the tallest setups.
- $1,285
Under the Tray
- 72” rear drawerSealed, 5” tall by 22.25” wide. Ford and GM trucks.
- $2,385
- Outdoor kitchenBuilt into the lower front storage box, with room for a grill or cooktop (not included).
- $1,246
- Rear sensor barMounts under the rear apron and carries over the sensors from your factory bumper. Fits Ford and Ram. GM trucks are still being tested, so check with your dealer before ordering one for a GM.
- $398
Passenger Side of the Bulkhead
- 15” matching box, passenger sideFills the open half beside the driver side bulkhead. Use it instead of the tire rack.
- $2,491
- 14.5” spare tire carrier, passenger sideMounts on the deck between the camper and the bulkhead. 14.5” wide.
- $1,034
Deck
- 12” removable perimeter fenceBolts to the L-Track.
- $2,650
Other Options
- BLIS radar lens covers
- $195
- Dually jack bracket adaptersSet wide to clear dually fenders.
- Ask for pricing
- Custom powder coatingA powder coat color picked to come close to your truck’s paint. Non-metallic only, no wet paint, and you approve a color sample first. Expect a close match, not an exact one.
- $1,200
Dealer installation is extra and quoted by your dealer. Tariffs are normally built into the price unless your purchase agreement says otherwise. For an exact number, book a consultation and we’ll price your full build line by line.
See It in the Field
These photos show an earlier build of the HD-60-HC. The under-deck box profiles and the tail lights have been updated since.
Pair It with a Camper
Aluma Tray HD-60-HC FAQ
What makes the HD-60-HC different from the HD-60?
It’s set up for the OEV High Country. Four tapered pockets in the deck (two front, two rear) take the camper’s mounting feet, and the camper bolts down into them. It also swaps the HD-60’s full width 7” bulkhead for a deeper 15” bulkhead on the driver side half.
Can I put a different camper on the HD-60-HC?
It’s built around the High Country. Other camper brands don’t have matching mounting points underneath, so the deck pockets have nothing to locate. Talk to your dealer or book a consultation and we’ll point you to the right tray.
Is the bulkhead included with the HD-60-HC?
Yes. The 15” rectangular bulkhead on the driver side half, 42” wide, is part of the $19,075 USD starting price. The passenger side is left open for a matching 15” box ($2,491) or a 14.5” spare tire carrier ($1,034).
Which trucks does the HD-60-HC fit?
Domestic commercial chassis cabs with a 60 inch cab to axle measurement. Measure from the back of the cab to the center of the rear axle, or check your truck’s published spec, before you order.
How much weight can an Aluma Tray carry?
The 6.75’ and 8’ carry 3,000 lbs and the HD-60 and HD-60-HC carry 5,000 lbs. Both ratings are for a load spread evenly across the deck, not stacked in one spot.
How long does an Aluma Tray take to build?
Plan on about 8 weeks. That number moves with how busy the shop is, so ask your dealer or book a consultation for the current build slots.
What warranty comes with an Aluma Tray?
Lite Industries backs every Aluma Tray with a one year limited base warranty and a three year limited structural warranty. Register within 30 days of purchase to activate it. Coverage is for personal use only.
Tell us your truck.
We'll spec the right tray.


